This past Saturday evening Common Wave Hifi hosted the North American Debut of the Devore Fidelity O/Reference Speaker System. These high sensitivity speakers feature a 2 box design. From the Devore Website:
10” paper-cone woofer with a cast Bronze chassis and an all new woofer motor, fully optimized with a pure AlNiCo magnet, copper Faraday rings above and below the gap, a titanium former, and a machined bronze phase plug resulting in better magnetic and inductive linearity, increased sensitivity, and an order of magnitude lower distortion throughout most of the frequency range.
1” silk dome tweeter loaded by a cast & machined Bronze horn with an all new tweeter motor utilizing a large rare-earth magnet and an underhung voice-coil for increased linearity at lower treble frequencies and higher sensitivity.
.75” silk dome super-tweeter with a cast & machined bronze horn and rare-earth magnet.
Solid machined Bronze port tubes and machined brass input-plate are de-coupled from the cabinet to reduce vibration.
11-inch reinforced aluminum woofer and all-new motor system capable of a massive 2 1/4 inch excursion.
11-inch reinforced aluminum passive radiator naturally tuned below 20Hz in-cabinet with no equalization.
Rigid two-inch thick birch plywood front baffle and solid machined brass input-plate to reduce vibration.
Dedicated 700 watt amplifier and all analog signal path including fully adjustable low-pass crossover, variable phase, subsonic filter, and equalization at 20Hz and 35Hz to tailor response to different room installations.
If you were able to hear this speaker system, please share your thoughts.